 |
Step 1: Roll or spray on the base coat.
|
 |
Step 2: Apply heavy second coat of base. Wait 1 minute. "Back roll" from
ceiling to floor. (Backroll is the action which occurs immediately after a
contractor sprays paint on a ceiling or wall. Usually one person sprays and
another one rolls and distributes the paint evenly around the surface. It is
a quicker way to paint large areas as the painter need not dip back into the
roller pan.)
|
 |
Step 3: Wait 5 minutes and knockdown with ARMORTOOLSTM KnockDown Knife.
Wait 2 hours before applying glaze coat. Knockdown requires using our knife
and with your hand fairly parallel to the wall surface, swipe and smooth the
raised spattered product.
|
 |
Step 4: Roll or spray on glaze coat over dried base coat.
|
 |
Step 5: Using ARMORTOOLSTM Glaze Squeegee, immediately wipe off glaze
vertically- starting at the ceiling. Wipe off excess glaze from squeegee
after every swipe.
|
